| Control System: |
+Pulse Width Control 1520usec Neutral |
Current Drain (4.8V): |
7.2mA/idle |
| Required Pulse: |
3-5 Volt Peak to Peak Square Wave |
Current Drain (6.0V): |
8mA/idle |
| Operating Voltage: |
4.8-6.0 Volts |
Direction: |
Counter Clockwise/Pulse Traveling 1520-1900usec |
| Operating Temperature
Range: |
-20 to +60 Degree C |
Motor Type: |
3 Pole Ferrite |
| Operating Speed (4.8V): |
0.23sec/60 degrees at no load |
Potentiometer Drive: |
Indirect Drive |
| Operating Speed (6.0V): |
0.19sec/60 degrees at no load |
Bearing Type: |
Plastic Bearing |
| Stall Torque (4.8V): |
44 oz/in. (3.2kg.cm) |
Gear Type: |
All Nylon Gears |
| Stall Torque (6.0V): |
56.8 oz/in. (4.1kg.cm) |
Connector Wire
Length: |
12" |
| Operating Angle: |
45 Deg. one side pulse traveling 400usec |
Dimensions: |
1.6" x 0.8"x 1.4" (41 x 20 x 36mm) |
| 360 Modifiable: |
Yes |
Weight: |
1.3oz. (37.2g) |
S3003 FUTABA
SERVO 
