
PIC18F8722 Family

 PIC18F6527  PIC18F8527
 PIC18F6622  PIC18F8622
 PIC18F6627  PIC18F8627
 PIC18F6722  PIC18F8722

64/80-Pin, 1-Mbit,
Enhanced Flash Microcontrollers with
10-bit A/D and nanoWatt Technology

Peripheral Highlights:

 Two Master Synchronous Serial Port (MSSP)
  modules supporting 2/3/4-wire SPI (all 4
  modes) and I2C Master and Slave modes
 Two Capture/Compare/PWM (CCP) modules
 Three Enhanced Capture/Compare/PWM (ECCP)
  modules:
  - One, two or four PWM outputs
  - Selectable polarity
  - Programmable dead time
  - Auto-Shutdown and Auto-Restart
 Two Enhanced Addressable USART modules:
  - Supports RS-485, RS-232 and LIN 1.2
  - Auto-Wake-up on Start bit
  - Auto-Baud Detect
 10-bit, up to 16-channel Analog-to-Digital
  Converter module (A/D)
  - Auto-acquisition capability
  - Conversion available during Sleep
 Dual analog comparators with input multiplexing
 High-current sink/source 25 mA/25 mA
 Four programmable external interrupts
 Four input change interrupts

External Memory Interface
(PIC18F8527/8622/8627/8722 only):

 Address capability of up to 2 Mbytes
 8-bit or 16-bit interface
 8, 12, 16 and 20-bit Address modes

Power-Managed Modes:

 Run: CPU on, peripherals on
 Idle: CPU off, peripherals on
 Sleep: CPU off, peripherals off
 Idle mode currents down to 15 A typical
 Sleep current down to 0.2 A typical
 Timer1 Oscillator: 1.8 A, 32 kHz, 2V
 Watchdog Timer: 2.1 A
 
Special Microcontroller Features:

 C compiler optimized architecture:
  - Optional extended instruction set designed to
    optimize re-entrant code
 100,000 erase/write cycle Enhanced Flash
  program memory typical
 1,000,000 erase/write cycle Data EEPROM
  memory typical
 Flash/Data EEPROM Retention: 100 years typical
 Self-programmable under software control
 Priority levels for interrupts
 8 x 8 Single-Cycle Hardware Multiplier
 Extended Watchdog Timer (WDT):
  - Programmable period from 4 ms to 131s
 Single-Supply In-Circuit Serial Programming
  (ICSP) via two pins
 In-Circuit Debug (ICD) via two pins
 Wide operating voltage range: 2.0V to 5.5V
 Fail-Safe Clock Monitor
 Two-Speed Oscillator Start-up
 nanoWatt Technology