
 PIC16C61    PIC16C64A
 PIC16C62    PIC16CR64
 PIC16C62A   PIC16C65
 PIC16CR62   PIC16C65A
 PIC16C63    PIC16CR65
 PIC16CR63   PIC16C66
 PIC16C64    PIC16C67

PIC16C6X Microcontroller Core Features:

 High performance RISC CPU
 Only 35 single word instructions to learn
 All single cycle instructions except for program
  branches which are two-cycle
 Operating speed: DC - 20 MHz clock input
  DC - 200 ns instruction cycle
 Interrupt capability
 Eight level deep hardware stack
 Direct, indirect, and relative addressing modes
 Power-on Reset (POR)
 Power-up Timer (PWRT) and
  Oscillator Start-up Timer (OST)
 Watchdog Timer (WDT) with its own on-chip RC
  oscillator for reliable operation
 Programmable code-protection
 Power saving SLEEP mode
 Selectable oscillator options
  Low-power, high-speed CMOS EPROM/ROM
  technology
  Fully static design
  Wide operating voltage range: 2.5V to 6.0V
  Commercial, Industrial, and Extended
  temperature ranges
  Low-power consumption:
      < 2 mA @ 5V, 4 MHz
      15mA typical @ 3V, 32 kHz
      < 1mA typical standby current

PIC16C6X Peripheral Features:

 Timer0: 8-bit timer/counter with 8-bit prescaler
 Timer1: 16-bit timer/counter with prescaler,
  can be incremented during sleep via
  external crystal/clock
 Timer2: 8-bit timer/counter with 8-bit period
  register, prescaler and postscaler
 Capture/Compare/PWM (CCP) module(s)
 Capture is 16-bit, max resolution is 12.5 ns,
  Compare is 16-bit, max resolution is 200 ns,
  PWM max resolution is 10-bit.
 Synchronous Serial Port (SSP) with SPI and I2C
 Universal Synchronous Asynchronous Receiver
  Transmitter (USART/SCI)
 Parallel Slave Port (PSP) 8-bits wide, with
  external RD, WR and CS controls
 Brown-out detection circuitry for
  Brown-out Reset (BOR)


