
 PIC10F200
 PIC10F202
 PIC10F204
 PIC10F206

High-Performance RISC CPU:

 Only 33 single-word instructions to learn
 All single-cycle instructions except for program
  branches, which  are two-cycle
 12-bit wide instructions
 2-level deep hardware stack
 Direct, Indirect and Relative Addressing modes for
  data and instructions
 8-bit wide data path
 8 Special Function Hardware registers
 Operating speed:
  - 4 MHz internal clock
  - 1s instruction cycle

Special Microcontroller Features:

 4 MHz precision internal oscillator:
  - Factory calibrated to 1%
 In-Circuit Serial Programming (ICSP
 In-Circuit Debugging (ICD) support
 Power-on Reset (POR)
 Device Reset Timer (DRT)
 Watchdog Timer (WDT) with dedicated RC oscillator
  for reliable operation
 Programmable code protection
 Multiplexed MCLR input pin
 Internal weak pull-ups on I/O pins
 Power-saving Sleep mode
 Wake-up from Sleep on pin change

Low-Power Features/CMOS Technology:

 Operating Current:
  - < 350 A @ 2V, 4 MHz
 Standby Current:
  - 100 nA @ 2V, typical
 Low-power, high-speed Flash technology:
  - 100,000 Flash endurance
  - > 40 year retention
 Fully static design
 Wide operating voltage range: 2.0V to 5.5V
 Wide temperature range:
  - Industrial: -40C to +85C
  - Extended: -40C to +125C

Peripheral Features (PIC10F200/202):

 4 I/O pins:
  - 3 I/O pins with individual direction control
  - 1 input only pin
  - High current sink/source for direct LED drive
  - Wake-on-change
  - Weak pull-ups
 8-bit real-time clock/counter (TMR0) with 8-bit 
   programmable prescaler

Peripheral Features (PIC10F204/206):

 4 I/O pins:
  - 3 I/O pins with individual direction control
  - 1 input only pin
  - High current sink/source for direct LED drive
  - Wake-on-change
  - Weak pull-ups
 8-bit real-time clock/counter (TMR0) with 8-bit
   programmable  prescaler
 1 Comparator
  - Internal absolute voltage reference
  - Both comparator inputs visible externally
  - Comparator output visible externally
